• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

MGA MGA front bumper support dimensions

Share this page

J

jessebogan

Jedi Knight
Offline
Hello folks,

I am looking for a measurement from the centerline to the bumper mounting "threaded rods" on the front frame extension. I am working on a Mark II. The part I have has a hole for a crank, which would be an easy spot to center it from. I would like to repair this part as it is original to the car. I could also use a photo from "straight ahead". Any help would be greatly appriciated.
Thanks,
 
Jesse,

I got some dimensions for the front extension from another poster a while back that he sent in an effort to aid me in my quest to put the dimensions on autocad. Too much got in the way and I never got it done (it might be a bit above my skill level anyway). Email me and I'll attach the scans of the dimensions and send them over to you. I can't guarantee that they will answer your original question but it's worth a try.

Randy Myers
randysmga@gmail.com
 
Back
Top