• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

MGA MGA engine weight?

Share this page

H

Harold

Senior Member
Country flag
Offline
Hi--I'm getting ready to pull the engine --transmission--and everything hanging on to it----how much does the darn thing weigh anyway?--
 
A lot! A B engine is around 400 lbs. Don't remember if that's with or without "everything hanging on to it". Transmission is 75 or 80 lbs.; add 25 or so if overdrive. Would imagine the A engine is pretty close to that.
 
thanks--I had always used "trucker's rope" orange and black with the morris minor, MG Midget and a chain fall--but those engines, etc were "A-Block" and a lot lighter--
I'll have to rethink this--thanks again
 
Easier and quicker. to pull the engine alone and get the trans out later.

IIRC the complete engine without ancillaries stuck on it is around 350 lbs.
 
Back
Top