Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Banjo
Yoda
Offline
Hiya all youse MG guys. I have a question.
I'm working on putting the inner door panals back into an MGA. No real big thing to those, but the body shop that did the paint, tried to install the door seals as well. What they did was put the metal toothed clips every so often around the door opening, then laid the small lip of the rubber gasket over the seam and tried to jam the fuzzy strip over top of it to keep it in place. It looks ok, but it dosen't seem to hold togeather very well.
Is that how it's supposed to be, or what?
Pics would be helpful.
It also seems that the doors don't close very well with all that stuff jammed in there.
I'm working on putting the inner door panals back into an MGA. No real big thing to those, but the body shop that did the paint, tried to install the door seals as well. What they did was put the metal toothed clips every so often around the door opening, then laid the small lip of the rubber gasket over the seam and tried to jam the fuzzy strip over top of it to keep it in place. It looks ok, but it dosen't seem to hold togeather very well.
Is that how it's supposed to be, or what?
Pics would be helpful.
It also seems that the doors don't close very well with all that stuff jammed in there.