• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

T-Series MG TD fender question

Share this page

J

Jamaican

Freshman Member
Offline
I have a buddy who just picked up a TD that is need of some metal work. In looking at the rear fenders there is a band of flat steel stitch welded onto the inner section of the beaded wheel well opening for extra support. I'd like to know if ths is as factory or if it may have been added?

The car is rather nice and had a costly restoration at one point but he has found some small things that will need to be changed back to OE to get it up to standard. Which is part of the reason I'm questioning the supports.

Thanks for any insight.
 
On T series cars, this is the place for answers! (Link below). There is none finer. Sign up for free and get world wide help from folks who have them and have restored them. Every answer to every question is usually found by searching the archives. Click on the logo in the upper corner to sign up. PJ

https://www2.mgcars.org.uk/cgi-bin/gen5?r...t&subject=8
MG BBS T Series TD-TF Threads
 
Thanks guys it's greatly appreciated. I contacted a buddy who is currently restoring one, he said his has them on the front and not the rear while this one is the opposite. I'll put them back in after the repairs, I just wanted to be sure.

Thanks again
 
Back
Top