Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I recently had to remove the exhaust manufold to drill and tap a new hole from a broken bolt. The manufold is "slotted" where the bolts attach. This is not from wear but actual make. How do you get the intake and exhaust holes in the block to align with the holes in the manufold ? There is a movement of over one half inch +/-. I guessed and hope for good results...but there must be a certain method of alignment.
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
MG Exhaust
- Thread starter StevenA
- Start date