• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

master cyl, leak

Share this page

T

tom628

Senior Member
Offline
76 TR6 : Master cyl. has started leaking. The fluid is seeping down the front of the vac. booster. I have a new cyl. on order, but I'm wondering if any damage has been done to the booster because of the leak. Can I just clean out any fluid that has found its way into the booster?

Tom
 
Worth a try, but don't be surprised if the booster dies within a few months.

I made a "vacuum cleaner" out of a Mason jar and a cheap air-powered vacuum pump, then stuck a length of brass tubing down through the opening to suck out as much fluid as possible from the inside of the booster. Seems to be OK so far.
 
Tom......you might want to check your pedal box too. When my MC let go it did the usual paint removal below it, but it also dumped a lot into the servo which then leaked onto the pedal box inside the car. Ignore the yellow arrows but you can see the blistered and missing paint. I ended up getting a rebuilt servo from Ted Schumacher https://www.tsimportedautomotive.com/

ClutchStop.jpg
 
Back
Top