• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Manifold gasket

Share this page

MGTF1250Dave

MGTF1250Dave

Jedi Knight
Country flag
Offline
Aloha all,

I need to replace a leaking exhaust/intake manifold gasket. I have the new one on hand. Does it matter which side goes against the engine? Both sides are of the same material, however oneside is concave and the other convex in shape. Thanks in advance for the help.

Safety Fast,
Dave
 
Dave,

I think the concave feature you are refering to is just a function of the big press that stamped the gasket out. However, I've been wrong before.
 
Aloha Steve,

I think you are right, mahalo (thanks). Previous gaskets I've used had one side with a perforated metal facing and the other with just the gasket material. I had always assumed the metal side went against the head.

Safety fast,
Dave
 
Good assumtion .. that way of you have to take off the manifold you dont have to spend a year bent over the bonnet scrapping gasket material off the head.
smile.gif
 
Back
Top