Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Does anyone have a pic of the mainifold drain bracket location on a 63 BJ7? I believe the 2 are bolted to the oil pan one on each end. When I looked under the car it looks like the oil pan has a lip on it so the bracket doesn't sit flat. Also does anyone know if a 63 BJ7 has overflow drains on the carbs and if so where are they routed?
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Mainifold Drain Bracket Location
- Thread starter PeterB
- Start date
Share this page
Offline
Do you have the oval washers shown here as item 60?
https://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28852
With the washers in place the bracket should clear the lip on the pan.
Note two of the bolts (item 57) are longer to accommodate the brackets' thickness.
Steve
Altadena, CA, USA
BN6
https://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28852
With the washers in place the bracket should clear the lip on the pan.
Note two of the bolts (item 57) are longer to accommodate the brackets' thickness.
Steve
Altadena, CA, USA
BN6
Keoke
Great Pumpkin
Offline
With the # 60 washers in place the bracket should clear the lip on the pan.
No if you notice there are 25 identical item #60 washers used simply to secure the sump none are unique. The little brackets are slightly offset to clear the sump lip. If you have an old Lucas relay the bracket on the back can be used to make two of the drain brackets--Fwiw--Keoke
No if you notice there are 25 identical item #60 washers used simply to secure the sump none are unique. The little brackets are slightly offset to clear the sump lip. If you have an old Lucas relay the bracket on the back can be used to make two of the drain brackets--Fwiw--Keoke