• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Lots of opportunities here

Share this page

This is not far from me. I've added it to my watch list....
 
some assembly required
 
If I was only 20 years old again and had the time.
Nice starting point.
Did somebody shoot the rear end with a shotgun?
What is with all the holes? Is that from pulling out dents or something?
 
Yes the holes are for a snaatcher, the shell&titlis a good start. I would be on it too if it were closer to me. Shell really dosen't look to bad.

If you had the knowlege of where and how it all goes together may be a deal in the working
 
i really want an BJ7 project, but would be very happy with a bug eye project. Just a little to far for me. Could save a ton if i got a bug eye, ( justification to wife) as I am sure the BJ7 will put me in the poor house.
dreaming again
Ok JP the answer is NO, my car is not painted, maybe soon,
waiting for the driveshaft, the machine shop is fitting the RX 7 flange, then the rear end will go in then maybe paint
Cheers Phil
 
MCS said:
i really want an BJ7 project, but would be very happy with a bug eye project. Just a little to far for me. Could save a ton if i got a bug eye, ( justification to wife) as I am sure the BJ7 will put me in the poor house.
dreaming again
Ok JP the answer is NO, my car is not painted, maybe soon,
waiting for the driveshaft, the machine shop is fitting the RX 7 flange, then the rear end will go in then maybe paint
Cheers Phil
Click to expand...

Phil,

How about I pick it up and meet you in Detroit?! :laugh:

I am SUCH an enabler, aren't I! LOL
 
MCS said:
Ok JP the answer is NO, my car is not painted, maybe soon,
waiting for the driveshaft, the machine shop is fitting the RX 7 flange, then the rear end will go in then maybe paint
Cheers Phil
Click to expand...
:whistle:

you around Friday? Mark & I are thinking of a run
 
Hey Detroit is so close, stop it, next i will need a barn for all my stuff

JP working Friday, off to the simulator for a day of fun.
otherwise I would join you
Phil
 
MCS said:
Hey Detroit is so close, stop it, next i will need a barn for all my stuff

JP working Friday, off to the simulator for a day of fun.
otherwise I would join you
Phil
Click to expand...

Have fun, in terms of barn - I've seen that garage, I bet you can fit 6 Spridgets in there minimum. 4 on the right parked sideways, one on the hoist, one under.
 
Thought I had an XK 150 project but the guy wants blood. Restored price for one that needs restoration. Last restored almost 30 years ago professionally and not quite completed.
 
Back
Top