• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Looking for a screw?

Share this page

jlaird

jlaird

Great Pumpkin
Country flag
Offline
This one has a philips round head I beleive and larger than normal threads. It holds the lower half of the stearing shaft mount to the upper half where it is attached to the fire wall. I can not seem to find anything to fit. So if you have a parts car you will have two and hopefully Miss Agatha will have two as well. Only one now.
 
That screw is a 1/4 x 20 (not sure how long) but an inch or so and is available anywhere. 1/4 x 20 hex head will work too.
You probably have an old can of screws with a bunch of 1/4 20s in it.
 
Really, will look again. Oh is about an inch long.
 
i have the same bolt on my support. i can check it as well, but as i remember, it was a standard type thread and size.
 
I found one in an old box of stuff, had looked yesterday and did not see it. Old eyes. All's well, stearing installed.
 
Back
Top