TR6 Looking for a reverse gear for my tr6 gearbox for my tr3

[Got_All_4]

Took the gear box apart today and discovered the reverse gear has one large chip out of a tooth and 2 smaller other ones. Looked like someone tried to jam it into reverse and took out 2 partial teeth before the large one. Thought I had a spare but it was really was chewed up. So looking for a good 21 tooth reverse gear if anyone has spares.

Another question is about the bearings. Everything looks good. Counter shaft bearings, mains, and spigot. Not knowing the quality of new bearings today should I leave the old ones in or replace them. The cost is minimal.

 

[Marvin Gruber]

Will try to remember to look today. Pretty sure I have one out but where it is?
marv

 

[Marvin Gruber]

Found a gear, not much better thanyours. No broken teeth but all are worn and two teeth have about a 1/3 grd off.
Marv

 

[Got_All_4]

Thanks Marv! I got one like that too. Teeth are almost mushroomed over.

 

[titanic]

There is one on ebay for $65 including shipping. https://www.ebay.com/itm/TRIUMPH-TR...m35eeaead8d:m:mFvGlbdm3ALVc1dvO5vI0Ww&vxp=mtr
Berry

 

[Got_All_4]

Thanks Berry I saw that. Poor 1 pic and poor view for no returns and as is. I asked for better pics and they sent me a few that were better. I'm checking with my local parts guy at Team Triumph on Wednesday.

 

[Got_All_4]

Thanks for your help. got one today.

 

[Marvin Gruber]

Guess what, I found a good gear today. Any one need a reverse gear?

Marv