• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

T-Series Looking at a TD...

Share this page

D

dgaldrich

Member
Country flag
Offline
A friend of mine has recently acquired a 52 MG TD missing some vital bits (like engine, transmission, and instruments). I'm in Florida and he's in Minnesota and not a real MG guy. In any event, I asked for the serial number just to try to find out when the car was made and he sent back the Type 22381 and Body Number of 4426-60843. I know the Type number is correct and while I wait for him to find the real serial number, I'm curious as to whether anyone can tell me what on earth the Body Number is or means. I can find little mention in any of the references conveniently at hand. Looking through the T Register, I find nothing like it on any of the data.

BTW, he's thinking of putting a Mazda Miata engine in it but would sell it to me and I'd put an XPAG engine/trans in if I can find one. Any help out there on either issue? Thanks
 
What is true for all classic cars is especially true of the T series MG; buy the most original car that is in great condition to start with. They easily cost twice what they are worth to restore. They are truly a labor of love , but let someone else love the thing first! In your case , even if the car were free , it would cost you more to find its missing parts than you could go buy a nice complete running car for. All you'll be buying for 2500 in a used TD engine is an engine that needs another 5,000 spent on it to rebuild it. A gearbox that is ready to use is 2,000. Instruments ready to install , 1,000.
 
From what I've seen, and I've by no means done detailed research, the first prat of the body number is the body type. The second number seems to be a sequential body number which appears to start not from the beginning of each model but from the first tub MG built. Which would be why it's a number of nearly 61k rather than somewhere in the 20k range. Others may know better, that's just the way it appears from my earlier cars.
 
If you want a car, get the best one you can find. That's the cheapest, in the long run. If you want a project, at the very least, get one that is complete or missing only some minor parts. Replacing missing parts is really expensive. If you don't have to do that, you have a prayer of restoring it in a cost effective manner.
 
Walk away from it!! It's a monetary disaster waiting to happen! I started with a complete running TF and when done, I'll have close to $35,000 in it without batting an eye. If all that stuff is missing, It's a parts car for body parts, nothing else. To modify it with a drive train from another car is still going to cost a fortune. Unless it's a free gift, I'd run away! JMHO. PJ

I might ad to this post, Anyone who has no experience or has no knowledge in what's involved in restoring a T series MG with it's wood frame construction should have an expert on them look over any car before getting involved! Their as far from restoring an MGB than a model T Ford is from a Thunderbird! The wood rots over the years and most can not be seen without tearing the car apart. There's a lot of them out there that guys have started and found out in a short time they made a big mistake money wise and months/years to restore. Their a labor of love and you need deep pockets to complete the car.
 
Last edited:
Thanks for the replies. I do, in fact, have several friends that have experience with T-series and access to a pretty decent selection of parts. The serial number on the dumbiron is 4973 so that makes it a Dec 1950 production item though it was registered in the US as a 52. The absolutely worst case is that parting out the project would yield a profit. Thank you eBay.
 
Well, in my opinion the absolutely worst case is that you start working on it, spend a lot of money, and then realize that it will cost too much to finish it, so you sell it at a big loss. That's why it's a good idea to sit down with a pencil, paper, and some on-line parts catalogs and figure out what you need to do, how much it will cost, and how much time it will take. I would never discourage anyone from undertaking a project, but it has to be planned and cost-estimated. If you can see your way clear to do it in a manner that is within your cost limits and time limits, go for it. But go into it informed.
 
Back
Top