-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
longbride driver handle hardware & key lock needed
- Thread starter gar
- Start date
Share this page
I've read your request over a number of times and I can't figure out exactly what it is you're missing.
You've lost the hardware, but you have the handles? Do you need the forward remote crank and release, the connecting rod and the latch mechanism from inside the door? They are the same as on all other 6 cylinder roadster doors except the latch for the right side has the added lock lever. Are these what you need?
You've lost the hardware, but you have the handles? Do you need the forward remote crank and release, the connecting rod and the latch mechanism from inside the door? They are the same as on all other 6 cylinder roadster doors except the latch for the right side has the added lock lever. Are these what you need?
