• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A Lockheed Master Cylinder 56 TR3

Share this page

mgedit

mgedit

Jedi Knight
Country flag
Offline
My Lockheed cylinder was sleeved (by Whitepost before I bought my car in pieces). As part of my restoration I rebuilt the MC. All was well for a short while, but now MC is leaking (using silicone fluid). Called Whitepost and they were very helpful and willing to tackle rebuild. As soon as I mentioned silicone, there was a longish pause and the usual, we don't recommend silicone. My question is whether anyone is aware of a rebuild kit, or rebuilder, who is able to source durable seals. I am aware that silicone can swell some seals, but if I had been using dot 3 or 4 I'd be looking at an expensive repaint. Anyone with personal experience with Lockheed cylinder rebuild or rebuilder? Open to suggestions, but want to stick with silicone. Cheers, Mike
 
Try new seals from another vendor is the only suggestuion I can think of. I've had silicone in my XKE for 12 years now witth no problems.
 
Marvin, that's what I'd like to do. It is just trying to sort out who might have silicone safe seals. Cheers, Mike
 
Back
Top