• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A Lockeed rear brake banjo fittings.

Share this page

R

Redoakboo

Jedi Warrior
Country flag
Offline
After searching forever, a TR friend put me on some used banjo fittings for the rear brakes on my 54 TR-2. Sometime later, I discovered that I have a Girling System installed on my car.
Had to order new cylinders and pads for the Girling system. If anyone is in need of these banjo fittings, let me know. I will give you a deal on them.

Dick
 
That would be great Dick. I bought a 1955 tr2 and it had the early rear axle. I could use those fittings. What do you need for them? If you need something, I might have it.

I will try sending a private message, but I have had trouble with the system because my computer skills evidently are not that good.

steve
 
Back
Top