-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
link to control head rebuild
- Thread starter donbmw
- Start date
Share this page
emmett1010
Jedi Hopeful
Offline
Hey Don:
This is Emmett from McComb. I met you at the NO show.
I'm putting together the 57 TR3.
Anyways, I tried to repair my control head, only to finally realise that all of the small parts weren't there. I gave up and bought a complete new head.
I have many control head parts, including a new wire harness, and button assembly if you could use them.
The article you are hunting is in the wiki section.
Good luck, Emmett
This is Emmett from McComb. I met you at the NO show.
I'm putting together the 57 TR3.
Anyways, I tried to repair my control head, only to finally realise that all of the small parts weren't there. I gave up and bought a complete new head.
I have many control head parts, including a new wire harness, and button assembly if you could use them.
The article you are hunting is in the wiki section.
Good luck, Emmett
MGTF1250Dave
Jedi Knight
Offline
Aloha Don,
Here is a link to a technical archive:
https://www.tr-register.com.au/files/technical.htm
in the second box down is an article written by Clive Elsdon titled "Disassembling the Control Head in the steering column" that provides a description of the process with photos and shows you all the bits inside. Althought the article does not describe reassmbly, you just kind of "reverse engineer" it back together.
Here is a link to a technical archive:
https://www.tr-register.com.au/files/technical.htm
in the second box down is an article written by Clive Elsdon titled "Disassembling the Control Head in the steering column" that provides a description of the process with photos and shows you all the bits inside. Althought the article does not describe reassmbly, you just kind of "reverse engineer" it back together.
