• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A Left turn braking problem [TR3]

Share this page

gsalt57tr3

gsalt57tr3

Jedi Warrior
Offline
Here's a new one, when I am in a hard left turn sometimes it feels as though I am braking. We have examined the tire and wheel well and see no evidence of any rubbing.

When I am in a left turn and braking, it is even worse, it seems to pull me harder to the left.

Anyone with a similar problem or advise?
 
Perhaps the problem are loose wheel bearings and the rotor kicks to one side on a strong turn or possibly the front end alignment is not balanced letting one of the wheels rub. The tie rod end assemblies should be the same from end to end. You could have one long and one short and still be aligned for straight driving, but could not have the proper turning radius.
George
 
When you replace your brake hoses, re-do the wheelbearings too,sp is onto this one I think. But I will bet there is something getting hot and holding brake pressure(bad hose)too.
MD(mad dog)
 
Back
Top