• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Left Rear Shock Mount

Share this page

John Turney

John Turney

Yoda
Silver
Offline
I'm not liking the look of these:

IMG_1411-Reduced.jpgLeft Read Shock Mount-Lower Front.jpgLeft Read Shock Mount-Lower Rear.jpg

While replacing the left axle shaft, bearing, etc. I noticed these cracks. Looks like some drilling to stop the cracks and welding is in order.
 
Common fatigue area. Did you find any signs on the other side? Prep, drill, weld, finish and enjoy. Good luck with the repair. A Hot Rod (muffler shop) did mine before I had any welding skills. It's held up nicely after all these years. Gonzo
 
No sign on the right side; that was the first place I looked.

I have Waxoil inside the frame. I wonder if it will ignite?
 
I'll watch for the mushroom cloud. I welded a couple of small cracks in that area a few years ago. Filled the gas tank (less vapor phase that way) and welded away. If you are really concerned about the waxoil, just purge the frame a bit with some argon or whatever inert gas you weld with.
 
Much sucking of teeth!

Get the grinder out and channel out the cracks or a series of small holes and then weld 'em up. I doubt if the waxoil would cause much of a problem but just in case try a sample weld on a piece of steel with waxoil on it and see what happens.

PS Then let us know the results :wink-new:

:cheers:

Bob
 
Back
Top