• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A Late TR3 Starter

Share this page

af3683

af3683

Jedi Trainee
Country flag
Offline
I would appreciate it if someone could please tell me what type and size bolt goes on my TR3B starter. I've noticed that it is missing and would like to get one at the local hardware store. Does that bolt simply go into the transmission or do I also need a lock washer and nut. Thanks for your help. Art
 
Art
You will need a nut and washer as well. A fine thread 7/16" bolt with 9/16" head x 3" long should do the trick if I'm remembering correctly, others will chime in if I am not correct.
Marv
 
Original bolt was 3/8NF, 2-1/8" long (HB0917), with a nut & spring (lock) washer. Grade 3 will do fine, but you can use Grade 5 if you prefer.

FWIW, I added a Helicoil to my transmission so the upper bolt does just thread into the flange, thereby eliminating that dang nut. You'll see why when you try to put it in :smile:
 
Back
Top