Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Offline
Finally broken in!
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Knock-Off Hammer
- Thread starter Editor_Reid
- Start date
Share this page
twas_brillig
Jedi Knight
Offline
Ummmm...... Nice handle?? Doug
Offline
I have one of these American Hammers that you can send back to the factory to be recast: > Hammer Recast Program - American Hammer <
dougie
Luke Skywalker
Offline
Yup.... here's an option I've used, > Soft Alloy Head Hammers | LSP Industries, Inc. <
Offline
Like George Washington's hatchet. The head and the handle have all been replaced three times but it's all original. Cool idea
OP
Offline
Well, that wasn't from one tightening. That's the result of many years of use.
Now that I've driven the car something like 75-100 miles since those new tires were installed, I'll give the knock-offs a little more encouragement to stay put. Then they should be good for the duration.
By the way, in my lifetime of driving cars with spline-drive wheels, I've had two come off while driving. Fortunately neither incident was at enough speed to result in serious damage (one destroyed a fender, but that's all), but I have never had a problem with wheels being tightened too much.
Now that I've driven the car something like 75-100 miles since those new tires were installed, I'll give the knock-offs a little more encouragement to stay put. Then they should be good for the duration.
By the way, in my lifetime of driving cars with spline-drive wheels, I've had two come off while driving. Fortunately neither incident was at enough speed to result in serious damage (one destroyed a fender, but that's all), but I have never had a problem with wheels being tightened too much.
Offline
A sailor on our boat (in Pearl Harbor) had the Base Auto Shop do his brakes on his Triumph. After they were done, he drove back to the pier and one front wheel came off and rolled into the water. The shop had reversed the hubs.
Randy Forbes
Yoda
Offline
Towing the car backwards would have the same effect; DON'T tow a car with spline/pin-drive wheels backwards.