-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
King pin reamer
- Thread starter tld6008
- Start date
Share this page
Offline
If you're not a member of the local Healey Club there, have you tried contacting them?tld6008 said:
Randy Forbes
Yoda
Offline
ANY machine shop can do it for you, if you can get them interested enough. I use standard reamers, but with a pilot in the opposite end to ensure the cuts align with each other.
We're moving in ten (10) days to the Sarasota/Bradenton area, but it'll be a month before I get all the tools unpacked and organized, and I already have quite a backlog of BMW ///M Coupes & Rdstrs already in the queue (several of whom think they're going to be "first"...).
More pictures here: https://www.spcarsplus.com/gallery3/index.php/hnr/Kingpins
We're moving in ten (10) days to the Sarasota/Bradenton area, but it'll be a month before I get all the tools unpacked and organized, and I already have quite a backlog of BMW ///M Coupes & Rdstrs already in the queue (several of whom think they're going to be "first"...).
More pictures here: https://www.spcarsplus.com/gallery3/index.php/hnr/Kingpins
bob hughes
Luke Skywalker
Offline
On the subject of King Pins, any one experiencing problems when greasing them up, can't get my Wanner gun to hold when giving them the treatment.
Bob
Bob
Randy Forbes
Yoda
Offline
Alemite/Zerk fittings aren't what they used to be; I find that in many cases, I have to use considerable pressure to hold the fitting of the gun onto the fitting on the component to get a merely adequate seal. Without falure, this usually results in a few wasted squirts, and a paper shop towel filled with grease__I always wipe away any excess left on the exterior of the hardware.
I don't know if it's poor quality on the part of the gun, or the recepticle fittings, but you're right, things don't mate up the way they used to.
I don't know if it's poor quality on the part of the gun, or the recepticle fittings, but you're right, things don't mate up the way they used to.
Offline
I had similar problems greasing my kingpins too. I changed the fitting on my grease gun to one that cost more than the original price of the gun, and it took care of the problem. I also changed zerk fittings twice until I got the job done. Definitely takes longer to grease a Healey today than it did 40 years ago! Now I understand why they are making cars that don't need to be greased today....can't get a decent grease gun.Randy Forbes said: