• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Kin Pin Kit - O-rings

Share this page

B

BBH

Senior Member
Country flag
Offline
Just going through the parts for the front suspension and investigating the NOS Quinton Hazell King Pin set I acquired. The 'kit' (for each king pin) has two cork rings, which I take to be the seals for the lower fulcrum pin, however there is not another cork ring as shown on the service parts list ( 1A4746 ). There are however two rubber O rings.

Is one of these a replacement for the cork ring on the top of the bottom trunnion?

If so where does the other one go?

Andy
 
BBH, In the moss parts book "front suspension" there is 2 fulcrum (cork) rings item no 69. I replaced these with 2 "O" rings. Item 51 seal swivel pin, cork, I also replaced this with "O" ring. The respective p/n 031-277 , p/n031-275 these both come in the rebuild kit, O rings to me is a far better and longer lasting than cork. Saltiga
 
Back
Top