• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Kenlowe fan install

Share this page

I

IanIrving

Jedi Hopeful
Country flag
Offline
Does anyone have photos of a Kenlowe fan in a BJ8. There seem to be two methods of fastening, through the fins with plastic strips giving direct connection between the radiator and the fan, or mounted onto body which would mean leakage of the cooling air I guess. Which is best and why?

Ian
 
Hey Ian,
Don't know about mounting onto the cross brace assembly in front of the radiator as not sure there would be enough room. I have mounted this type of add on electric fan on a BN6 and on a BN2 and mounted directly to the radiator using the plastic pieces that push through the fins. Pretty easy to mount and only downside I know of is you obviously cut down on the face area of the radiator for air to flow through with the fan mounted. Of course, you then have the electric fan to push through more air so it's a plus overall. Before I added the fan my BN6 would run over 200 degrees very quickly if I got stopped in traffic or at a light, now keeps at 190 which is an okay temp.
Regards,
Mike
 
Back
Top