K&N Element Part Number

[ChrisS]

Does anyone have the part number for the single oval K&N filter that goes in the housings that were scripted with Sprite and Midget? I have an old box that says E-1322, but it doesn't come up as a valid element. Thanks.

 

[Bugeye58]

Chris, let me do some digging. It's a round element that gets "squished" into an oval.
Jeff

 

[GB1]

Chris

I will look at mine when I get home.

 

[Bugeye58]

Chris, there is no part number on my element, however, it measures 9.75" OD, 7.875" ID, and is 2.375" tall. Going to the K&N site, that translates into an E-2760 element, using their "search by dimensions" function.
Hope this helps.
Jeff

 

[ChrisS]

Thanks, the dimensions was going to be my next question. That's what great about this place, you guys know the questions to answer before they are asked. /ubbthreads/images/graemlins/thumbsup.gif

 

[Bugeye58]

Okay, when "squished" into the oval it's about 12"x 6". Strangely enough, the height remains unchanged! /ubbthreads/images/graemlins/grin.gif
Jeff

 

[ChrisS]

Until I ave a friend "help" tightened to cover bolts...the height then changes to 1.875". /ubbthreads/images/graemlins/confused.gif

 

[Bugeye58]

Chris, mine has acorn nuts on the cover studs, and shouldered studs, so you can't overtighten it.
Jeff

 

[GB1]

Same here no PN

Here is a pic