• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Just picked up a brake lathe

Share this page

Banjo

Banjo

Yoda
Country flag
Offline
Spotted a vintage brake lathe on the local CL. I went over earlier and was able to pick it up for $60!!!!
It will only do drums, but seems to be complete, and it works. I'll post some pics as soon as I get them.
It works backwards from any lathe I've ever used. The drum mounts solid, and the cutting bar spins around! Had a nice vintage Black and Decker 1 horse electric motor.
 
Still no pics... I know, What good am I? Anyway, an update. I ran acros a guy on an Antique Ford forum that had the manual in PDF! The bad news is after he sent it to me, I realised how much is missing. I guess you gotta say it's still doing pretty good for a shop tool built in the late 40s. So if anyone runs across parts for an old Barret brake drum lathe for cheap, I'd be interested. in the meantime, I got a smokin deal on a much newer Snap-on lathe that needs some repair, but is complete with all it's adapters. Now the task is to get this one up and running, then start making some money with it.
 
Back
Top