Hey there Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Just an up-date
I have been doing some more cleanup to access the backs of the b pillars.
I have ordered new B-Pillar back panels from Moss Motors and should have them in the next couple of weeks.
I have the body scheduled for sandblasting the first week of March. It will give me enough time to do the major repairs to the body.
I also purchased a 140 Amp Mig Welder and have started learning to weld. It's not real pretty yet but up until a week ago I had never welded before.
I found that I have a 65 amp alternator in my boxes of parts. It is new and in the box. This actually helps me.
I have a modern ammeter. The original is non functional anyway but could be repaired..but this is what I think will work..
If I take the modern ammeter apart and use the needle and all the electrics in the old case and with the old face I would end up with an ammeter that will support 60 amps yet look original. The ammeter can be connected "backward" and would then operate backward (+ being a discharge and - being a charge situation). That ability would allow me to insert the new one into the old case upside down so the needle hangs from the top as in my original. The needle movement would read properly. I'll keep you posted on that one, but so far everything is working out well. I am working on restoring the face right now.
I have been doing some more cleanup to access the backs of the b pillars.
I have ordered new B-Pillar back panels from Moss Motors and should have them in the next couple of weeks.
I have the body scheduled for sandblasting the first week of March. It will give me enough time to do the major repairs to the body.
I also purchased a 140 Amp Mig Welder and have started learning to weld. It's not real pretty yet but up until a week ago I had never welded before.
I found that I have a 65 amp alternator in my boxes of parts. It is new and in the box. This actually helps me.
I have a modern ammeter. The original is non functional anyway but could be repaired..but this is what I think will work..
If I take the modern ammeter apart and use the needle and all the electrics in the old case and with the old face I would end up with an ammeter that will support 60 amps yet look original. The ammeter can be connected "backward" and would then operate backward (+ being a discharge and - being a charge situation). That ability would allow me to insert the new one into the old case upside down so the needle hangs from the top as in my original. The needle movement would read properly. I'll keep you posted on that one, but so far everything is working out well. I am working on restoring the face right now.
A friendly reminder - be careful what links you click on here. If a link is posted by someone you don't know, or the URL looks fishy, DON'T CLICK. Spammers sometimes post links that lead to sites that can infect your computer, so be mindful what you click.