Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
davidtinker
Member
Offline
Ok 29 posts in 6 years, so I am getting better!!
When I restored my 2+2 in the late 80's I put new floor panels on both sides (and many more panels besides as well as a new bonnet, but the new bonnet or 3 is another story) and the other day whilst delving in my parts bin I discovered a tin containing the old jacking bosses which were removed fron the old floor panels and which I had forgotten to re-fit!!
So here is the question, does anyone have the dimensions for re-positioning the jacking point bosses to the new floors. Do not forget that this is a long wheelbase 2+2.
Cheers from Wales.
David
When I restored my 2+2 in the late 80's I put new floor panels on both sides (and many more panels besides as well as a new bonnet, but the new bonnet or 3 is another story) and the other day whilst delving in my parts bin I discovered a tin containing the old jacking bosses which were removed fron the old floor panels and which I had forgotten to re-fit!!
So here is the question, does anyone have the dimensions for re-positioning the jacking point bosses to the new floors. Do not forget that this is a long wheelbase 2+2.
Cheers from Wales.
David