• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

jacking and axle stands

Share this page

Woodie

Woodie

Jedi Warrior
Offline
I am going to work on "Queen Vic" saturday, a 1970 Midget. I am going to jack her up with a 4 wheel hydraulic jack and put axle stand under her. WHere is the best place to jack and get her high enough to put the stands under her. Also is there a best place to put the axle stands.
 
Center of rear end and center of front cross member. Use a rag on jack for rear end if you have refinished it and a foot sq peice of plywood if your front crossmenber is not already scared and concave in the center.
 
Hehe, stands gesh I answered for jack. stands at rear under the spring hangers or on axle ends and at the front under the frame or a frames depending what you are doing.
 
go it thanks, took me a minute to figure out who jack was and why you answered for him...hmmm must be friday
 
Back
Top