• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Jack holes

maddy

Senior Member
Offline
Did some of the 1974 midgets have 2 jack holes on each side of the car? Sorry, I don't know what else to call them!
 
1975 - 79 did because of the new motor/rubber bumpers I believe it kinda threw the old balance point off.
I don't think a 1974 should, however if the rocker panels have been changed someone may have put a later rocker panel on it...
 
Dual jack holes began with GAN6/154101 produced September 1974
 
As mentioned, the answer is yes.

The original dealer brochures are an excellent means of tracking down much of the basic info (see photo below). I have scanned in all of the Midget brochures on my web site www.raysmg.com (go to the 'Documentation' page).

Ray

page3.jpg
 
Back
Top