Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Banjo
Yoda
Offline
Hoo boy, I pulled that Benz in today to have a good look at it. YIKES! this things a mess. he's done his own Veggie oil conversion (hint hint!!!). It looks like a rats nest of wires, untrimmed zip ties, hoses and valves and insualting mat. there's stuff unplugged everywhere.
Currently the vacuume system consists of a piece of 3/8ths fuel line with a collection of plastic "T"s that all go nowhere. the only things hooked up are the brake booster and the shift solenoid. Everything else is hanging loose in the engine bay. of course the diesel soaked fuel/vacuume line has collapsed and has rendered what was hooked up, useless.
The left rear trailing arm is rotten and cracked and the wheel has about 10 deg negative camber, the right rear tire was flat, it will not start without a tiny spritz of ether ( that scares the snot outta me) it will not stop without pushing the stop lever on the engine, the hood realease is a coat hanger, and the hood itsself crunches and pops off the cowell. Oh man....
Customer says, just make the booster, tranny, and ignition switch systems work.
He can figure out the HVAC later (I doubt that very much.)
I'll do it. I've made these things work 100% before. minimal operation isen't much of a challange. but it's be easier to start on level ground instead of the hole this pile fell into.
Currently the vacuume system consists of a piece of 3/8ths fuel line with a collection of plastic "T"s that all go nowhere. the only things hooked up are the brake booster and the shift solenoid. Everything else is hanging loose in the engine bay. of course the diesel soaked fuel/vacuume line has collapsed and has rendered what was hooked up, useless.
The left rear trailing arm is rotten and cracked and the wheel has about 10 deg negative camber, the right rear tire was flat, it will not start without a tiny spritz of ether ( that scares the snot outta me) it will not stop without pushing the stop lever on the engine, the hood realease is a coat hanger, and the hood itsself crunches and pops off the cowell. Oh man....
Customer says, just make the booster, tranny, and ignition switch systems work.
He can figure out the HVAC later (I doubt that very much.)
I'll do it. I've made these things work 100% before. minimal operation isen't much of a challange. but it's be easier to start on level ground instead of the hole this pile fell into.
