-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Is this a for a "B"
- Thread starter DNK
- Start date
Share this page
Silverghost
Yoda
Offline
Re: Is this a for a "B"
My best guess...no. The car that goes on has a roll bar and a larger, squarer cockpit. Look at the distance from the head rests/ roll bar openings to the back edge with the roll bar notches on the corners. To my eye, that's MUCH bigger than the space behind the headrests of a B to the back edge of the cockpit.
No good guesses what it IS for though.....sorry.
My best guess...no. The car that goes on has a roll bar and a larger, squarer cockpit. Look at the distance from the head rests/ roll bar openings to the back edge with the roll bar notches on the corners. To my eye, that's MUCH bigger than the space behind the headrests of a B to the back edge of the cockpit.
No good guesses what it IS for though.....sorry.
rick_ingram
Yoda
Offline
Re: Is this a for a "B"
No.
The MGB/MGC tonneau covers follow the curve of the rear deck when snapped.
The cover shown in the ad is square.
No.
The MGB/MGC tonneau covers follow the curve of the rear deck when snapped.
The cover shown in the ad is square.
rick_ingram
Yoda
Offline
rick_ingram
Yoda
Offline
Re: Is this a for a "B"
But...there would be no protection for the doors...they slope down...note how the Morgan tonneau pictured attaches to the front cowl...then cuts down and angles to cover the side of the cockpit...then back up to snap to the rear....compared to the tonneau that is for sale...which is square. I don't see how it would fit.
DNK said:
But...there would be no protection for the doors...they slope down...note how the Morgan tonneau pictured attaches to the front cowl...then cuts down and angles to cover the side of the cockpit...then back up to snap to the rear....compared to the tonneau that is for sale...which is square. I don't see how it would fit.
