Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Offline
During TR3/3A production was there a mix of Purolator and Tecalemit oil filter assemblies? How can one tell the two apart?
Regards, Walter
Regards, Walter
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
TR2/3/3A Is it a Purolator or Tecalemit?
- Thread starter Tropical TR
- Start date
Share this page
M_Pied_Lourd
Darth Vader
Offline
Hi Walter,
Check out the spin on filter documentation from Moss. There are pictures of the different filter heads.
https://www.mossmotors.com/graphics...28_Oil_Filter_Adaptor_TR3_4A_instructions.pdf
Hope this helps.
Cheers
Tush
Check out the spin on filter documentation from Moss. There are pictures of the different filter heads.
https://www.mossmotors.com/graphics...28_Oil_Filter_Adaptor_TR3_4A_instructions.pdf
Hope this helps.
Cheers
Tush
TR3driver
Great Pumpkin - R.I.P
Offline
Has anyone found an original Tecalemit filter head on a TR3/3A? I don't believe the factory used them until during the TR4A run. The SPC doesn't mention anything about Tecalemit filters until TR4A.
However, there were several variations on the Purolator head (hence the note on the Moss page about not fitting TR3 before TS12650E). Those early "bypass" filter heads were still made by Purolator, but looked somewhat different than the later "full flow" filter head. There's a drawing of one of them on the Moss application page (which also lists Tecalemit only for some TR4A).
https://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=29117
Another way to tell is if the long bolt through the canister has fine or coarse threads on it. Purolator used coarse, Tecalemit used fine.
However, there were several variations on the Purolator head (hence the note on the Moss page about not fitting TR3 before TS12650E). Those early "bypass" filter heads were still made by Purolator, but looked somewhat different than the later "full flow" filter head. There's a drawing of one of them on the Moss application page (which also lists Tecalemit only for some TR4A).
https://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=29117
Another way to tell is if the long bolt through the canister has fine or coarse threads on it. Purolator used coarse, Tecalemit used fine.
OP
Offline
Thank you, gentlemen. Much appreciated!
