• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Interesting Carb Tuning with Colortune article

Share this page

jsneddon

jsneddon

Jedi Knight
Country flag
Offline
NFI and all that blah blah blah.

I was reading Allan's post about valve sizes and did a quick google on David Vizard.

He has a rather interesting method of getting the optimum mixture on carbs with using the Colortune (for those of you not familiar it is a spark plug with a glass window so you can actually see the color of the spark).

The article is here:
https://www.niksula.hut.fi/~mdobruck/siililand/mini/diy/10/dyno.htm

he jacks the car up in the rear and with a buddy running in 3rd gear at WOT he has them drag the brakes until the revs drop to 2000 and looks at the spark color. Very interesting in-depth article.

Do please be careful out there though... jeez... one slip of the jack stands and something or somebody is toast.

/ubbthreads/images/graemlins/nonono.gif
 
I like it!

I'd take the rear wheels off the car, just to be sure, though.
My car has an S&S "Harley" carb with an adjustable main jet (like an old lawn mower). I keep thinking I should have a dash mounted knob to turn it...that would be even better.
 
Reminds me of the day at a Ferrari shop when it was time to fine tune the Daytona prototype that was being restored. The master pulled the exhaust headers back a bit and had me hold the throttle at 6,000, while he twisted about until a pretty blue flame came from each port. What a sound.
 
Has anybody used an O2 sensor with an Air Fuel Ratio gauge to set the carbs?? I have a Westach analog A/F gauge on my supercharged Miata that has proved to be very valuble on two occasions when it showed lean conditions when in boost. Since it has a buffered needle, I can see at any given moment how the air/fuel ratio looks. I believe I read an article awhile ago where someone with years of experience tuning LBCs thought that a certain car in question was running too lean. An O2 sensor was installed and discovered that the A/F ratio was too rich. The old mechanic thought it was poppycock, but they leaned out the carbs just for the heck of it. Well, the son-a-bi*** ran like a raped ape. Sometimes new technology can be applied to the old stuff with good results.
 
I had one of those Colortune plugs 35 years ago in the UK.
They were a new idea then and worked well, but I always had an uneasy feeling when leaning close over it peering at the flame colour. I couldn't help thinking that it was just a piece of glass between me and a lot of hot gas pressure, always had the idea that it was a rocket waiting to go off in my face. /ubbthreads/images/graemlins/cryin.gif
They used to have a warning not to exceed 3000 RPM.
 
I like the idea of testing with a load and seeing how the mixture burns on the way up to max power. The safety with the car running max-out on jack stands is a concern and with the modern equipment of today, it seems some one could rig up a digital camera to record it or with the fiber optics see it real time while inside the car. Alta, do you think the mfg ever thought of having a full load on the window?
 
Back
Top