-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Intake / exhaust manifold gasket install goop?
- Thread starter GeorgeC
- Start date
Share this page
Offline
I have never used any sort of sealant on the manifold gaskets. Multiple builds and blownb head gaskets on FP car never had any leaks with a dry gasket.
Lots of copper spray on head gasket though.
Lots of copper spray on head gasket though.
Offline
Copper spray for head gaskets, appropriate torque on the fasteners with dry gaskets for the intake/exhaust. Same experience as Joe. E-Prod, C-Sedan and MANY street (performance Lotus and BMC) mills.
...maybe a film of oil on the intake/exhaust gasket if fiber. With a re-torque after initial heat sink run of the engine. Never had a problem either way.
...maybe a film of oil on the intake/exhaust gasket if fiber. With a re-torque after initial heat sink run of the engine. Never had a problem either way.