Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Healey Nut
Luke Skywalker
Offline
So does it go with the metal side to the head or to the manifolds ?
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Intake/Exhaust gasket
- Thread starter Healey Nut
- Start date
Share this page
bob hughes
Luke Skywalker
Offline
Good question
I followed what was there when I bought the car. Mine was metal to the manifold, not sure if it was right though.
Bob
I followed what was there when I bought the car. Mine was metal to the manifold, not sure if it was right though.
Bob
OP
Healey Nut
Luke Skywalker
Offline
Well I made it an easier decision . Got a new gasket today and its metal both sides .
Guess it depends on who does the repro gasket as to how its made .
Guess it depends on who does the repro gasket as to how its made .
Randy Forbes
Yoda
Offline
I can't say positively how it goes, but it's a lot easier to scrape fibre gasket remains off the (3) manifolds than it is from the head face__with all the studs in the way.
I still do my work thinking that I might be the next guy that has to take something apart...
I still do my work thinking that I might be the next guy that has to take something apart...