-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Indpendent Rear Suspension Compatibility
- Thread starter RonT
- Start date
Share this page
Nope.
The cage holding everything is different (wider). The width (track) of the rear is also wider on the 420 by a few inches. But if you break it all down, the diff and hub carriers with hubs are the same. Brakes and rotors are different, but can be used with the diff. The axles, swing arms, cage, and shocks are the real different parts.
Phil.
The cage holding everything is different (wider). The width (track) of the rear is also wider on the 420 by a few inches. But if you break it all down, the diff and hub carriers with hubs are the same. Brakes and rotors are different, but can be used with the diff. The axles, swing arms, cage, and shocks are the real different parts.
Phil.