-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
-
When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Iinstall pre-pillow dash in pillow-dash car? Easy?
- Thread starter 58Custom
- Start date
Share this page
I have done it a couple of times. It's not too hard but you need all the parts, not just the dash.
Steering column, signal switch, crash pad, and you have to drill a hole on each side between the windshield and the crash pad to bolt up the corners of the dash.
Older cars had a fitting for a nut there, newer cars would need a captive nut or I use a carridge bolt and you have to look hard to see it in the inside corners of the windshield.
Steering column, signal switch, crash pad, and you have to drill a hole on each side between the windshield and the crash pad to bolt up the corners of the dash.
Older cars had a fitting for a nut there, newer cars would need a captive nut or I use a carridge bolt and you have to look hard to see it in the inside corners of the windshield.
Jim_Gruber
Yoda
Offline
It's that spear aimed towards my chest when removing the collapsable steering column that has held me back.