Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I recently installed a new dashboard. Everything works fine, except the ignition light at the botton of the tachometer stays on. In fact, it increases in intensity with higher RPMs and just abuot goes out at idle. I checked the amp meter wiring, and it is OK. I would appreciate any ideas.
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Ignition light staying on
- Thread starter bcouz
- Start date
Share this page
martx-5
Yoda
Offline
If you look at this wiring diagram, you will see that the bulb in question goes from the ignition to the alternator. When the alternator voltage exceeds the battery voltage, the bulb is extinguished. If it stays lit, that indicates a problem with the alternator. Did the light work correctly before you changed the dash?? I would first check the voltage output of the alternator. The symptoms you describe for the light are exactly what happens when the alternator belt is too loose. Check that first before ripping into the dash.