D
Deleted member 21878
Guest
Guest
Offline
The lense for my ignition light is missing. Anyone know where I can buy one?
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Share this page
Mike Tobin
Freshman Member
Offline
I made new ones.
Used binder divider tabs - the ones with the clear plastic. Each tab is a different color.
In my drift set there was one the same size as the lens whole. I punched it out of the tab and glued it in with a touch of super glue.
While I was at it I made a blue one for the high beam light.
Used binder divider tabs - the ones with the clear plastic. Each tab is a different color.
In my drift set there was one the same size as the lens whole. I punched it out of the tab and glued it in with a touch of super glue.
While I was at it I made a blue one for the high beam light.
OP
Deleted member 21878
Guest
Guest
Offline
thanks. hey i will give it a shot.
Bob_Spidell
Yoda
Offline
Depends on the type of car. Earlier cars had the red, clear plastic lens, my BJ8 has a plastic, 'jeweled' lens.
Rob Glasgow
Jedi Knight
Offline
Dronedog, IIRC you have a BT7. The lenses for both the ignition and high beams lights are red on that car.
OP
Deleted member 21878
Guest
Guest
Offline
Yup realized they were both red. I found the one in the bottom of the speedo and made the one for the tach. Great tip above. The look identical.
55modified
Senior Member
Offline
I have bought some from English Car Parts. You can get different colors. Triumph used different colors. I have red for oil pressure, Yellow for turn signal and green for high beam