TulsaFred
Jedi Warrior
Offline
The BE was running great with my rebuilt 1275. A couple days ago I relocated the coil from the generator mounting location to the body mounting location.
Went to start it today and it wouldn't start. Just cranked and cranked. Has gas but no spark.
Used my test light and there is current to the positive side of the coil when switched on, but no spark jumps across the plug wire when held close to the plug while cranking.
Touched the coil and it was extremely hot.
Did the coil go bad just from relocating it?
Other thoughts?
Fred
Went to start it today and it wouldn't start. Just cranked and cranked. Has gas but no spark.
Used my test light and there is current to the positive side of the coil when switched on, but no spark jumps across the plug wire when held close to the plug while cranking.
Touched the coil and it was extremely hot.
Did the coil go bad just from relocating it?
Other thoughts?
Fred