• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Ignition conversion on 58 Bug Eye back to original

Share this page

M

Mike

Guest
Guest
Offline
What would be needed to change my "turn and start" ignition back to the original 1958 Sprite ignition? Would I need to just change out the controls in the dash or would I also need a new starter? I'm not sure how the system works. Now it starts by just turning the key.

Thanks and Happy Holidays.

Mike
 
Sounds like you have a later ignition switch and a starter relay. Bugeyes had a pull switch for the starter; it's no problem to remove the relay (AKA starting solenoid) and install the pull switch. However, the bugeye ignition switch had the light switches built in, so you'd probably want to rewire that as well. I don't know what your car has done with the light switches. If they're separate from the ignition switch, you could leave them that way.
 
Back
Top