Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I have a problem with the idle revs on my 69 roadster, after a cold start the idle is 1200 revs once warm, but if I turn engine off and restart after a couple of minutes it is 800 but as soon as I start driving it goes back to 1200. Does anyone have any suggestions as to whats going on
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
MGB Idle problem
- Thread starter Jabber
- Start date
Share this page
Offline
Jabber - what carbs do you have on that engine?
800 warm idle is good, but 1200 revs when warm may be due to sticking throttle linkage. Just saying that because I had a similar problem on my 1974 MGB. Carbs were adjusted fine, warm idle speed set at 800, but when driving, idle never settled below 1500. Turned out the throttle pedal linkage was binding on the firewall.
Just a thought.
Tom M.
800 warm idle is good, but 1200 revs when warm may be due to sticking throttle linkage. Just saying that because I had a similar problem on my 1974 MGB. Carbs were adjusted fine, warm idle speed set at 800, but when driving, idle never settled below 1500. Turned out the throttle pedal linkage was binding on the firewall.
Just a thought.
Tom M.
mgdriver74
Freshman Member
Offline
You might also want to check your choke. Sounds like it's not completely closing.
