• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

I need a dimension from a BJ8.

John_Progess

Jedi Warrior
Country flag
Offline
I need the dimension across the top of the rear shroud right behind the doors on the outside of the small chrome piece attached to the shroud. My car is a 64 BJ8. It should be about 51" or so. Also is there any listing that has the dimensions of the car other than the frame dimensions in the manual. It would be nice during a restoration to have a dimension to check when installing new panels. Thanks for your help!

John
 
Hi John,
Measured straight across to the outside of each small chrome piece is 51". (Disclaimer here, on my car)
Roger
 
Back
Top