• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

HT plug leads routing on firing order

Share this page

K

Ken Kruger

Freshman Member
Offline
Can anybody tell me the HT plug lead routing or firing order to the
distributor for a 1986 Jaguar Sovereign 4.2?

The engine is not running at present and it is possible that the
distributor may be out of sink.

Any help will be just great
--
KiloKilo
 
If is the standard Jag 4.2 XK Engine, the fire order would be: 1,5,3,6,2,4 with #1 being the rear most plug and number 6 being at the front of the engine.

Welcome to the forum!

Basil
 
The "reverse" timing order was used on all six cylinder Jags from the XK120 through the XJ6 series 3. The X40 then used the forward most plug as the nu;mber one.
 
Back
Top