Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Offline
My rear carb doesn't follow the pattern suggested by the manual.
More specifically, enriching the mixture does nothing to increase engine speed as I lift the piston up 1/32nd of an inch. I detect absolutely no increase in RPMs.
That suggests something is wrong, of course.
Does it likely mean that at idle speed the float isn't letting more fuel inside the carb? And would that mean the jet is dirty or the bowl is dirty or blocked? Or both?
thx
More specifically, enriching the mixture does nothing to increase engine speed as I lift the piston up 1/32nd of an inch. I detect absolutely no increase in RPMs.
That suggests something is wrong, of course.
Does it likely mean that at idle speed the float isn't letting more fuel inside the carb? And would that mean the jet is dirty or the bowl is dirty or blocked? Or both?
thx
