• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

HS6 jet level

Share this page

John Loftus

John Loftus

Darth Vader
Offline
Does anyone know the approx. setting for the HS6 jet bearing? During the rebuild I set mine down 6 flats from the bridge level but not sure if that info is correct for the HS6.

Cheers,
John
 
Hi John, I initially set the Jet nut Down two full turns. Where it ends up during tuning is the point that produces maximum speed with smooth runing.---Keoke-
 
Hi Keoke,

Thanks .. that should get us started. I know it's just a base setting but right now the guy trying to get the rebuilt motor running on the test stand is having problems. I doubt it's the carbs but must look under many stones /bcforum/images/%%GRAEMLIN_URL%%/grin.gif

Cheers,
John
 
Back
Top