-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
HS4 to HIF inlet manifold question
- Thread starter hottvr
- Start date
Share this page
As far as the spacing and bolting-up requirements go, they are interchangeable.
Other considerations are the threaded fittings - are they the appropriate size for your anti-pollution equipment (if used). Also the exhaust manifold "ears" should be the same thickness as the intake manifold "ears" or you will need to shim them to prevent vacuum leaks. I think there is about an 1/8" difference between the HS4 and HIF4 manifold ear thickness. These are minor considerations though, you should be able to create work-arounds.
Other considerations are the threaded fittings - are they the appropriate size for your anti-pollution equipment (if used). Also the exhaust manifold "ears" should be the same thickness as the intake manifold "ears" or you will need to shim them to prevent vacuum leaks. I think there is about an 1/8" difference between the HS4 and HIF4 manifold ear thickness. These are minor considerations though, you should be able to create work-arounds.
Bob Claffie
Jedi Knight
Offline
I swapped from HIF to HS4's without any fitting problems. Only glitch is the connecting shaft between the carbs is a different length. The HS4's requiring a longer shaft than the HIF's. Bob