• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

how to turn over the engine in a 69 midget

Share this page

S

SANdMAN_the

Member
Offline
i was wondering how some of you turn over the engine when checking valve clearances. i can't put a socket on the main pully with the frame in the way. is there an easier way than rolling the car in gear?

thanks,
john
 
sure cholk the front wheels, jack up one rear tire and turn that, Helps if you remove the plugs from the engine. BE SAFE


mark
 
Just make sure it is in gear...! Also, with the plugs out, you may be able to turn it over by pulling at the fan belt while holding all the slack out.

Guinn
 
John, I just pull the plugs and turn it over with the alternator pulley, while maintaining tension on the belt, as Guinn suggests. Occasionally I may have to use a wrench on the pulley nut, but not often.
One advantage to this method is that you are able to watch the valves while turning the engine over, which is hard to do if using the rear wheel.
Jeff
 
Back
Top