• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

How to remove old weather stripping

NutmegCT

Great Pumpkin
Gold
Offline
The rubber seal that surrounds the car door. After you're dug out most of the old cracked stuff, how the heck do you get rid of the bits of rubber and old adhesive that are left?

There's got to be a method that beats spending hours with a screwdriver scraping and chipping away. Maybe there's something which "dissolves" the old stuff?

View attachment 37739

Thanks.
Tom
 

JPSmit

Moderator
Staff member
Silver
Country flag
Offline
solvent maybe? Mr Clean scrub pad? heat gun? (don't use a dish scub pad it will scratch the paint - don't ask me how I know) what car is that Tom?
 

Mickey Richaud

Moderator
Staff member
Gold
Country flag
Offline
There are a number of adhesive solvents out there. Also, WD40 works pretty well. Get a plastic putty knife and have at it.
 
OP
NutmegCT

NutmegCT

Great Pumpkin
Gold
Offline
Thanks gents. It's my neighbor's 1958 Rambler American; we're cleaning it up so he can sell it. Very cool Eisenhower era basic family car, with the Borg-Warner "Flash-o-matic" transmission. Today we'll attack the remaining rubber crud with the recommended artillery. I also want to fix up the seats; 50+ year old foam rubber has turned into orange dust and "crispy critters".
 

LarryK

Yoda
Country flag
Offline
3M makes a decal and adhesive remover that once soaked really comes clean without any paint issues.
 
OP
NutmegCT

NutmegCT

Great Pumpkin
Gold
Offline
Thanks Larry. The WD40 and steel wool worked fine on the aluminum channel, but I didn't dare use that technique on the painted surface.

I'll get some 3M adhesive remover today.

Tom
 
OP
NutmegCT

NutmegCT

Great Pumpkin
Gold
Offline
Update - three stores didn't have 3M adhesive remover, so I got a can of "Goof Off Pro". (actually would be a good nickname for me ...)

093945306535lg.jpg


Worked like a charm. Pour onto a clean cloth, slowly massage into the remaining rubber on the painted surface. The old adhesive radually came completely off after about 30 seconds of slow rubbing. No damage to paint.

Now - new weatherseals installed!

View attachment 37773
 

LarryK

Yoda
Country flag
Offline
3M products are usually sold thru paint distributors or auto parts stores that cater to auto body work. 3M supplies have to be ordered by the pallet. I am lucky to have an old time family owned parts store in town.
 

PAUL161

Great Pumpkin
Silver
Country flag
Offline
Goof Off, Home Depot, Lowes and some other building supplies sells it. Good stuff! PJ
 
Similar threads
Thread starter Title Forum Replies Date
K TR2/3/3A What is best way to remove old nylon/rubber bush 525-020 from steering box shaft? Triumph 5
J TR2/3/3A Remove old dash vinyl. Triumph 2
beaulieu best tool to remove old bondo ? Restoration & Tools 14
K TR2/3/3A How to remove the front brake hub from the brake disc? Triumph 11
CARSINC How to remove factory contact cement? Spridgets 9
K TR2/3/3A " do not remove the fan as it is essential for establishing crankshaft balance" Triumph 9
drooartz Bugeye jack points to remove rear axle Spridgets 18
AUSMHLY BJ8 transmission mainshaft bearing force needed to install/remove Austin Healey 1
newmexTR3 TR2/3/3A How to remove thrust washer from lower wishbone & trunion Triumph 7
jfarris TR2/3/3A Rear Shock and link remove and replace Triumph 1
TomMull Using my press to remove stuck Girling caliper pistons Restoration & Tools 13
drooartz Hose from water pump to head, remove water pump? Spridgets 12
S TR2/3/3A Putting dish soap in the radiator to remove grease Triumph 10
tahoe healey Nano Magic scratch remove Austin Healey 2
F I can’t remove Wire wheels from new hubs - help Austin Healey 43
Basil 7 Ways to remove stripped screws Restoration & Tools 2
C How to remove entire dash panel on BN6? Austin Healey 4
crispy How to Remove the Exhaust Manifold?? [late BJ8] Austin Healey 27
hondo402000 TR6 TR6 Windscreen remove and now windows dont fit Triumph 3
edkap2002 TR6 fuel line compression fittings....how to remove Triumph 3
C MGB How do you remove "speed nuts"? MG 9
T TR4/4A Replacing rear pinion seal - remove driveshaft? Triumph 21
55modified Should I remove driver's side fender to work on footbox on my BN1? Austin Healey 14
R Remove engine/transmission advice needed Austin Healey 4
abarth69 Should I remove this section Spridgets 8
D TR2/3/3A wooodruff keys... how to remove Triumph 25
B remove BJ8 dash ? Austin Healey 1
Steve1970 TR6 Can I remove the shim on the rear gearbox mount [J-type OD] Triumph 11
4tecdog Access to remove Ariel Austin Healey 15
L Best Polish to remove surface scratches Austin Healey 12
T TR4/4A Does the water pump need to come off to remove the cylinder head? Triumph 5
C TR4/4A Best way to remove transmission fill port? Triumph 8
P How to remove the lever control? Austin Healey 9
Martinld123 Drain Pipe Rear Main Bearing Cap BN2, remove? Austin Healey 2
D BJ 8 How to remove chrome trim strip from door tops Austin Healey 7
S TR2/3/3A remove protective covering off floor pans Triumph 6
bighealeysource Best way to remove dried polishing compound Austin Healey 10
AngliaGT Easiest Way to Remove/Replace Rear Axle Seals/Etc.? Spridgets 9
J TR2/3/3A What is the best way to remove and replace carb shaft bushings. Triumph 4
Got_All_4 General TR How can I remove the finish on this center console for my 7 Triumph 9
B Remove Crank Nut Austin Healey 55
R Can't remove rear flexible brake hose Spridgets 5
C Any tips on how to remove frozen pistons from drum brake Wheel Cylinders??? Austin Healey 11
S TR2/3/3A remove a clutch fork Triumph 1
maxwedge5281 remove 100-6 grill emblem Austin Healey 1
drooartz MGB-GT Any gotchas when remove/replace rear axle? MG 4
Boggsy64 MGB Advice - Remove the seats MG 8
C How to remove temp sensor at block? Austin Healey 16
S Correct way to remove grease retaining cup from front hub? Austin Healey 7
Lukens TR2/3/3A Before I remove my steering box... Triumph 10

Similar threads

Top