-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
how many bolts
- Thread starter weewillie
- Start date
Share this page
dklawson
Yoda
Offline
You'd think that would be an easy question. Depending on the age of the car there will be one or two bolts on each "tower" where the subframe bolts up underneath the bulkhead.
Moving downward, I only remember each side having one 5/16" bolt holding the bottom, rear tabs to the passenger compartment floor.
At the front, there may be large bolts or tow-eyes through the subframe securing it to the front panel. Any other bits to be removed shouldn't be structural, but functional mounts for things like brake lines and wiring clips.
The steering rack is bolted to the passenger compartment floor with U-bolts. I think you'll find in the manuals they talk about lowering the subframe to remove the rack, not removing the rack to remove the subframe.
Moving downward, I only remember each side having one 5/16" bolt holding the bottom, rear tabs to the passenger compartment floor.
At the front, there may be large bolts or tow-eyes through the subframe securing it to the front panel. Any other bits to be removed shouldn't be structural, but functional mounts for things like brake lines and wiring clips.
The steering rack is bolted to the passenger compartment floor with U-bolts. I think you'll find in the manuals they talk about lowering the subframe to remove the rack, not removing the rack to remove the subframe.